Follow these steps to enable two way communication on your camera
<ol>
<li>Open the Smart Life App</li>
<li>Select the Pencil (settings) on the top right side of the menu</li>
<li>Under the Tab Basic Settings, select Basic Fuction Settings</li>
<li>Then select Talk Mode located at the bottom</li>
<li>Change settings to Two-Way Talk </li>
<li>All you have to do on the main menu is tap the Speak button once and you can have a two way communication (listening and speaking). Remember to tap on the speaker at the bottom left of the live feed so you can listen. By default the speaker is turned off. The speaker will have a small 'x' beside it to show that it is off. When you tap the speaker the small 'x' will dissapear.</li>
<li>If the talk Mode is set to One-Way Communication, you will have to hold down the speak button to talk. It is recommended to use the Two-Way Talk option.</li>
</ol>

Follow these steps to enable two way communication on your camera
Open the Smart Life App
Select the Pencil (settings) on the top right side of the menu
Under the Tab Basic Settings, select Basic Fuction Settings
Then select Talk Mode located at the bottom
Change settings to Two-Way Talk 
All you have to do on the main menu is tap the Speak button once and you can have a two way communication (listening and speaking).  Remember to tap on the speaker at the bottom left of the live feed so you can listen.  By default the speaker is turned off.  The speaker will have a small 'x' beside it to show that it is off.  When you tap the speaker the small 'x' will dissapear.
If the talk Mode is set to One-Way Communication, you will have to hold down the speak button to talk.  It is recommended to use the Two-Way Talk  option.

To enable two way communication on you OSI Camera

Floodlight Camera Unboxing & Quick Start Video Guide

How to enable the PIR light 

How do you adjust the OSI Floodlight brightness"

Can the OSI Floodlight Camera be "ceiling" mounted to an eave rather than "wall" mounted?

What type of junction box to i buy for the OSI Floodlight Camera?

PIR light still not turning on after Motion Sensor has been triggered after I enabled "PIR Light Warning"

How to Turn on Motion Detection, Change Sensitivity and Choose a Specific Motion Detection Area on the OSI Floodlight Camera

Why does the Floodlight Camera Light turn on during the day.

Where do I connect the Floodlight Camera wires to?

Why is my floodlight Camera light not turning on during the night & how to turn it on when motion is detected.

What is the lowest operating temperature for the Floodlight Camera.

Can the floodlight camera enable the siren to turn on when motion is detected? 

How to set the Floodlight Camera to turn the light on when motion is detected during the night or day/night. (new UI User Interface)

Floodlight Accessories

How to set up the Floodlight Camera -  Motion Detection lights - Night Vision - Recording (new user interface)

What is the dB volume of the Floodlight Camera Siren.

Floodlight Camera IP65 rating. What does that mean?

Can I schedule the Floodlight Camera light to turn On and Off at specific times of the day.

How to set up a scene in smart life to turn the siren on when floodlight light turns on.

Cannot connect Wi-Fi camera using the QR Code method - Try connecting using Wi-Fi Mode 

What to do if your camera shows offline on the Smart Life app

The correct way to view motion detected footage on your wi-fi camera

To convert a hardwired floodlight camera to a plug-in type that can be connected to a wall socket

Camera will not scan the QR Code on my phone

Why Aren't the Lights on My Floodlight Camera Turning On at Night?

OSI Smart Floodlight

Hi, how can we help?