Help CenterReset and Pair instructions have now been changed for new OSI Wireless Strobe Sirens purchased April 2022 and later. For those customers who purchased these sirens (whether separately or with the 14 Piece Kit), the instructions are still the same. This refers to when you press and hold the "Set" Button until you hear the following beeps to either Reset or Pair the Wireless strobe siren to the OSI Wifi Alarm System.Note: you can tell if you have the new siren as the gaps between each beep is approximately 3 seconds on the new siren vs 2 second gaps between the older model.
Purchased April 2022 and Later
- 4 Beeps to Reset the Siren
- 3 Beeps to pair (learn) the Siren
Note: when you pair (learn) the siren, if you here 2 consecutive beeps after your have selected the 'Siren Learn' on the alarm panel, then it has paired correctly. If you hear 4 consecutive beeps then the pair (learn) has timed out. It is very important to select the 'Siren Learn' on the alarm panel immediately when the siren is repeatedly flashing during the pair (learn) process.
Purchased FEB 2022 and Earlier
- 3 Beeps to Reset the Siren
- 2 Beeps to pair (learn) the Siren
Note: when you pair (learn) the siren, if you here 2 consecutive beeps after your have selected the 'Siren Learn' on the alarm panel, then it has paired correctly. If you hear 4 consecutive beeps then the pair (learn) has timed out. It is very important to select the 'Siren Learn' on the alarm panel immediately when the siren is repeatedly flashing during the pair (learn) process.