Instructions to create Tap-to-Run Scene to 'Arm Home', 'Arm Away' and Disarm the Gen 2 Alarm System

Instructions to create Tap-to-Run Scene to:
1. Arm Home
2. Arm Away
3. Disarm
Gen 2 Alarm System.

On the smart life app, select 'Smart' at the bottom and ensure that the Tap-To Run tab is highlight (bold) at the top.

Create Arm Away Scene

1. Select the + sign at the top right and select 'Create Scene'

2. Select 'Launch Tap-to-Run'

3. Beside 'Then', select the + sign
    Then select 'Device'
    Then select 'Select a Single Device'

4. Then Select the Gen 2 Alarm System (4G OSI Gen2)

5. Select 'Mode',  'Away' then select 'Confirm'

7. Then enable 'Show on Homepage' and select 'Save' 

8. Name 'Scene Name' to 'Arm Away', then select 'Confirm'

Create Arm Home Scene

1. Select the + sign at the top right and select 'Create Scene'

2. Select 'Launch Tap-to-Run'

3. Beside 'Then', select the + sign
    Then select 'Device'
    Then select 'Select a Single Device'

4. Then Select the Gen 2 Alarm System (4G OSI Gen2)

5. Select 'Mode',  'Home' then select 'Confirm'

6. Then enable 'Show on Homepage' and select 'Save' 

7. Name 'Scene Name' to 'Arm Away', then select 'Confirm'

Create Disarm Scene

1. Select the + sign at the top right and select 'Create Scene'

2. Select 'Launch Tap-to-Run'

3. Beside 'Then', select the + sign
    Then select 'Device'
    Then select 'Select a Single Device'

4. Then Select the Gen 2 Alarm System (4G OSI Gen2)

5. Select 'Mode',  'Disarm' then select 'Confirm'

6. Then enable 'Show on Homepage' and select 'Save' 

7. Name 'Scene Name' to 'Disarm Gen 2', then select 'Confirm'

Now when you want to Arm or Disarm the Gen 2.

1. Open the Smart Life App
2. Select 'Smart' at the bottom
3. Select Tap-to-Run at the top and the specific task.
   
   
   You will also see the quick launch buttons at the bottom of the Home Page