How to reset and add or re-add the Gen 2 (Wi-Fi 4G Gen 2) Wireless Siren

This video can be used for the Gen 2 Wi-Fi or the Gen 2 Wi-Fi/4G model. 

The only difference is the testing phase.  For the Gen 2 Wi-Fi model you would press on the SOS button  for 3 to 5 seconds and that would set off the alarm. 

For the Gen 2 Wi-Fi / 4G model you would tap once on the SOS button and you that will then display a Medical - FIre - Police and Police (silent) button.  All you would need to do to test out these buttons is to tap once on the Fire or Police button and that should trigger the alarm.

Please click the video link below to reset and add the wireless siren to the Gen 2.  
Click here for video

After you have performed your testing:

Verify that the 'Alarm Setup' has the following options enabled:
(Local Alarm and Siren Alarm)
1.  On the alarm panel select the Security Icon  and enter your User Code.

2. Select the 'Alarm' Icon.

3. Ensure that the following settings have been enabled below. 'Siren alarm' is the setting for the wireless Siren Alarm.