How to remove, reset and re-add the PTZ Camera to the Smart Life App

First ensure that you remove the PTZ Camera correrctly from the Smart Life app under device management?

1. Select the three lines on the upper left.
2. Select 'Device Managment'
3. Select the Device that you want to Delete '√'
4. Select 'Remove Device' at the bottom
5. Then select 'Done' at the top right to fully remove the device.
6. Then you can press the reset button on the camera to place it in pairing mode.
7. How to reset an OSI WI-Fi Camera

The flashing red light on the camera indicates that the camera has been fully reset and can be added to the smart life app. See Steps below.

1. Light on front of the camera is flashing

2. Opened the Smart Life App

3. Select 'Add Device' in the middle of the screen or you can also select the + sign at the top right corner and then select 'Add Device'

4. Select 'Camera and Lock' on the left column.

5. Select 'Smart Camera (Wi-Fi)' on the right column at the top.

6. When you see the screen 'Reset the Device', Select the Blue 'Next Button' at the bottom and select Next, Next, Next (Total of 4 times)

7. You should then see the screen were is says 'Select 2.4Ghz Network and enter password'
You should see your Wi-Fi network and then enter your password and selected 'Next'.

8. You should then see a QR Code to scan and face your phone toward the Mini PTZ Camera.

9. When the Camera scans the QRCode correctly you will hear a tone (ding, ding, ding)
If you did, press 'I heard a prompt'

10. On the next screen you will see 'Connecting Device

11. You will then see the PTZ camera added successfully and can now select 'Done' at the bottom of the Screen.

12. You should now see the camera interface and can now setup the camer's options. Recording, Motion Detection, Activity Area and more.

Check out the OSI Go Direct YouTube playlists for more information