How to set local weather on display (for 4G System only)?

In order for the alarm panel to display the weather, the alarm panel must be connected to the Smart Life App using Wi-Fi.

Step 1 Open the Smart Life App and select the OSI Alarm System 4G 

Step 2: At the top right corner, select the 'Pencil' 

Step 3: Scroll to the bottom of the page and select 'Location Information'

Step 4: Select 'Allow'

Step 5: You can click the top left arrow to return to the previous screen which will now show 'Location Information Allow'

Step 6: Check your display panel to confirm that the temperture is the same as your local temperature.

Note: That it would take a while for the weather to show up on the display after WiFi connection is established.  

Note: You may need to shut down the Smart Life app and power cycle the Alarm Panel.

How to: Power Cycle the alarm system

1. Unplug Power Adaptor
2. Slide the back panel off and set backup battery switch from the 'on' to 'off' position
3. Wait 1 minute
4. Switch Back Up Battery back on
5. Plug Power Adaptor Back in