Connecting the OSI Alarm Panel Sensors: Contact Sensor, Motion Sensor, Remote, RFID Tag and Wireless Strobe Alarm from the Smart Life App.

2 min. readlast update: 10.17.2023

Connecting Contact Sensor from Smart Life App

Connecting Motion Sensor from Smart Life App

Connecting Remotes from Smart Life App 

Connecting RFID Tags from Alarm Panel 

Connecting Wireless Strobe Siren (if you have one) from Alarm Panel

Important Notice re Strobe Siren:

Reset and Pair instructions have now been changed for new OSI Wireless Strobe Sirens purchased April 2022 and later. For those customers who purchased these sirens (whether separately or with the 14 Piece Kit), the instructions are still the same. This refers to when you press and hold the "Set" Button until you hear the following beeps to either Reset or Pair the Wireless strobe siren to the OSI Wifi Alarm System.Note: you can tell if you have the new siren as the gaps between each beep is approximately 3 seconds on the new siren vs 2 second gaps between the older model.

Important: Disconnect the wireless siren from the power adapter and turn the siren to the 'On' position.  

Purchased April 2022 and Later - There is a 2-3 second delay between each beep 

  • 4 Beeps to Reset the Siren - After resetting turn the siren 'Off' then 'On'
  • 3 Beeps to pair (learn) the Siren 
  • Please see video below. When you have finished adding the siren to the alarm panel, ensure that you plug the siren back into the power adapter. When it is plugged into the power adapter the on/off button is disabled. 

Purchased FEB 2022 and Earlier - The beeps are one right after the other, faster.  

  • 3 Beeps to Reset the Siren - After resetting turn the siren 'Off' then 'On' 
  • 2 Beeps to pair (learn) the Siren
  • Please see video below. When you have finished adding the siren to the alarm panel, ensure that you plug the siren back into the power adapter. When it is plugged into the power adapter the on/off button is disabled.  

Additional Sensor Information

IMPORTANT: For sensors that are installed at a maximum or further distance from the OSI Alarm Panel or may have obstructions that can cause issues, please read this article on the OSI Repeater.

SENSOR - Information: Max Distance, type of Batteries & Battery Installation 

Was this article helpful?